Description
Product Description
Extra Length Dock Bumper87in x 12in x 4.5in (2209.8mm x 304.8mm x 114.3mm)
NOTE: This product is not returnable.
Used on loading docks with dock seals, or where refrigeration or warmth is needed. Loading dock bumper and the dock-seal interact to completely seal the truck to the dock.
Uses/Applications:
- Have unlimited applications in factories, warehouses and docks
- Vehicle impact protection for loading docks
- Projecting above low docks
- Rub rails at the sides of truck wells
- Wall bumpers to protect against fork lift trucks
- Special construction features to accommodate unusual anchoring conditions
Features:
- Tough piles of truck tire material reduce chipping or abrasion, unlike molded rubber, extruded rubber, conveyor belting or wood plank bumpers
- Attractive deep black color enhances a neat, professional architectural look
- Manufactured under pressure exceeding 1,500 lbs. to absorb over 80% of impact force
- Anchor bolts protected by at least 3in of rubber to prevent damage
- Maintenance free
Material:
- 80% recycled material from fabric reinforced rubber pads cut from selected recycled truck tires
- Rubber pads laminated between structural steel angles and secured with 3/4in steel tie rods
Installation:
- Structural mounting angles permit welded installations or provide bolting through steel
- No assembly required
Note:
- 1/4in flat plates may be substituted for one or both angles
- If more anchorage devices are required there is an extra charge for each device
- Drawings are anchorage devices are available
Documentation
-
Description
Product Description
Extra Length Dock Bumper87in x 12in x 4.5in (2209.8mm x 304.8mm x 114.3mm)
NOTE: This product is not returnable.
Used on loading docks with dock seals, or where refrigeration or warmth is needed. Loading dock bumper and the dock-seal interact to completely seal the truck to the dock.
Uses/Applications:
- Have unlimited applications in factories, warehouses and docks
- Vehicle impact protection for loading docks
- Projecting above low docks
- Rub rails at the sides of truck wells
- Wall bumpers to protect against fork lift trucks
- Special construction features to accommodate unusual anchoring conditions
Features:
- Tough piles of truck tire material reduce chipping or abrasion, unlike molded rubber, extruded rubber, conveyor belting or wood plank bumpers
- Attractive deep black color enhances a neat, professional architectural look
- Manufactured under pressure exceeding 1,500 lbs. to absorb over 80% of impact force
- Anchor bolts protected by at least 3in of rubber to prevent damage
- Maintenance free
Material:
- 80% recycled material from fabric reinforced rubber pads cut from selected recycled truck tires
- Rubber pads laminated between structural steel angles and secured with 3/4in steel tie rods
Installation:
- Structural mounting angles permit welded installations or provide bolting through steel
- No assembly required
Note:
- 1/4in flat plates may be substituted for one or both angles
- If more anchorage devices are required there is an extra charge for each device
- Drawings are anchorage devices are available
Documentation
